SAVE HEAT
AND ENERGY

OPTIMIZE AND ENERGY EFFICIENCY EXISTING
HEAT INSTALLATIONS.

SAVE HEAT
AND ENERGY

OPTIMIZE AND ENERGY EFFICIENCY EXISTING
HEAT INSTALLATIONS.

A radiator system in imbalance means that the apartments in a property are too cold or too hot. This results in high energy consumption and high fault reporting frequency.

A radiator system in balance is a basic prerequisite for energy efficiency and good heat comfort. Normally, 21°C is selected as room temperature (norm value). Each degree’s increased average temperature above 20°C room temperature means approximately 5-7% increased energy consumption.

Functioning and qualitative thermostats are a prerequisite for ensuring the desired room temperature regardless of factors such as the use of room temperature. solar, wind, activities inside the property etc.

Depending on the conditions of the property and the radiator system, it is often necessary to balance and energy-efficient radiator system further through a static or dynamic adjustment. The most common methods are:

Methods of static adjustment

  • Traditional adjustment (installation of thermostats and pre-adjustable radiator valves).

  • Fixed Kv-value (installation of thermostats, adjustable radiator valves with fixed Kv-value).

  • Installation of stem adjustment valves.

Methods of dynamic adjustment

  • Installation of difference pressure valves.

  • Installation of maximum flow valves (installation of thermostats and automatic radiator valves).

Divello offers a full range of thermostats and radiator valves with the highest possible European energy rating (A) to implement a static or dynamic adjustment regardless of method. Divello also offers a large range of thermostats for direct connectivity on existing radiator valves independently of the make.

An adjustment of the heating system is one of the most common measures recommended in energy declarations.

SAVE HEAT AND ENERGY

A radiator system in imbalance means that the apartments in a property are too cold or too hot. This results in high energy consumption and high fault reporting frequency.

A radiator system in balance is a basic prerequisite for energy efficiency and good heat comfort. Normally, 21°C is selected as room temperature (norm value). Each degree’s increased average temperature above 20°C room temperature means approximately 5-7% increased energy consumption.

Functioning and qualitative thermostats are a prerequisite for ensuring the desired room temperature regardless of factors such as the use of room temperature. solar, wind, activities inside the property etc.

Depending on the conditions of the property and the radiator system, it is often necessary to balance and energy-efficient radiator system further through a static or dynamic adjustment. The most common methods are:

Methods of static adjustment

  • Traditional adjustment (installation of thermostats and pre-adjustable radiator valves).

  • Fixed Kv-value (installation of thermostats, adjustable radiator valves with fixed Kv-value).

  • Installation of stem adjustment valves.

Methods of dynamic adjustment

  • Installation of difference pressure valves.

  • Installation of maximum flow valves (installation of thermostats and automatic radiator valves).

Divello offers a full range of thermostats and radiator valves with the highest possible European energy rating (A) to implement a static or dynamic adjustment regardless of method. Divello also offers a large range of thermostats for direct connectivity on existing radiator valves independently of the make.

An adjustment of the heating system is one of the most common measures recommended in energy declarations.

DIVELLO ECONOM™

DIVELLO ECONOM™ is a universal, optimizing and energy efficient product system. This includes products for showers, mixers and radiators. The products replace traditional luminaires and radiator-dependent spare parts and contribute to improved water comfort, simplified service work and maximum safety.

Radiator products reduce heat and energy consumption on the radiator system by up to 20% and consist of thermostats and radiator valves.

ALL DIVELLO ECONOM™ products are delivered in white product packaging.

UNIVERSAL
SPARE PARTS

SAVE WATER
AND ENERGY

SAVE HEAT
AND ENERGY